Showing posts with label T5Xi. Show all posts
Showing posts with label T5Xi. Show all posts

Saturday, January 2, 2021

New Year: Time to tune up the gear!

 Greetings Gundivas,  Happy New Year!

Its a new year.  2020 has turned 21 and is probably on its way to start a wild year of blackout binge drinking. (Not like it hasn't already been doing that)

Since that is not my cup of tea, I decided to shake off the cabin fever and take a couple of my target rifles out to tune them up and verify all is well.  You should do this if your firearm hasn't been used in a long while or if you change something (mount a new scope, change triggers, etc)

It was a good day.  Both rifles are doing great by the end of the session.  One was spot on with no adjustments needed, the other was off.  It was 3 inches low and required fine tuning.  This is why you need to verify your gear before you hit the field.

First up was the Remington 700 LTR.

- Stock Remington 700 LTR (medium weight barrel)

- .308 Winchester

- 20 inch barrel

- KRG X-ray Chassis

- Burris XTR II 4-20 Scope

- Thunderbeast Ultra 7 Silencer

- Shooting Federal Gold Metal Match 175 grain

The Remington was still on and required no additional adjustment.  It pulled a little low.  I think this was bad trigger control on my part than the rifle itself.  The Remington is good to go to the next match or class.  All groups were inch and better.




 

Next up is the Tikka T3X.

- Stock Tikka T3X CTR (medium weight barrel)

- 6.5 Creedmoor

- 20 inch barrel

- KRG Bravo Chassis

- Steiner T5Xi 3-15 Scope

- Thunderbeast Ultra 9 Silencer

- Shooting Hornady 143 ELD-X Precision Hunter

As you can see, the Tikka started out 3 inches low at 100 yards and needed a little fine tuning.  I'm not sure what caused the zero to shift.  Maybe switching from the Ultra 7 to Ultra 9 silencer did it.  Or I  did something the last time before I put it into the safe.  I don't know.  All groups were inch and better. (After adjustment)

 

 

This is why you verify your gear before you hit the field.  

Let's make 2021 a great year.  Get out there, verify your gear is good to go and let's go shooting.  (If we can find ammunition)


-Gundude Mez

January 2021

Saturday, December 16, 2017

Review: Desert Technology SRS-A1Precision Rifle

You want to buy a long-range rifle?



So, you want to buy a long-range rifle to shoot 1000 yards or more.  You could buy a Remington 700.  But that would be a generic, boring, and a very pedestrian rifle to buy.  The same rifle everyone else owns.  Yawn!  Or better yet, you could buy a top tier rifle.  Why?  Why not?  You are shooting at 1000 yards and more.  Quality matters when you go out that far. 

Let me introduce you to the SRS-A1 by Desert Technology.  This is a top tier bolt action rifle with a half-MOA guarantee.  This puts the SRS on par with other top tier rifles such as Surgeon, Barrett MRAD and Georgia Precision. 




Scope Mount is by SPUHR (heavy duty industrial mount for hard use)
bipod: Harris



What does one-half MOA look like at 100 yards!  4 shots.
(Please pardon the operator error.  This should be one hole not two)


What makes the SRS unique among its peers is that it is a bullpup design.  The big advantage of the bullpup design is the shorter overall length.  The SRS with a 26” barrel is only 37” in length.  Compare this to 47” in length of a traditional rifle with the same 26 inch barrel.   This allows you to have a longer barrel without increasing the overall length or sacrificing muzzle velocity due to a shorter barrel.    
That extra muzzle velocity matters at long range.  Your round stays super sonic longer increasing your effective range.  Sure, I can shoot 1000 yards with a short 16 inch barrel.  But it is more difficult as the bullet drops to sub-sonic at approximately 800 yards.  Once the bullet goes sub-sonic it is more greatly affected by environmental conditions such as wind.  Making longer range shots more difficult.  A longer barrel in a shorter package is nice to have.  
Another advantage of the Bullpup design is the rifle the rifle easier to carry and maneuver in the field. 



SRS-A1 with 26 inch barrel compared to Remington 700 LTR with 20 inch barrel
Remington 700 LTR specs:
Scope Rings:  Seekins Precision 34mm



SRS (rear) is 2.5 inches shorter in overall length with a 26 inch barrel than a Remington 700 LTR (front) with a 20 inch barrel

Some other features of the SRS:

It has a 5 or 6 round detachable magazine with ambidextrous magazine release. 


6 round magazine for .308 Winchester


It comes with a built in rear Monopod to support the rear of the rifle.  This is a nice feature instead of using a more traditional sand bag to support the rear of the rifle. The Monopod is spring loaded for rapid adjustment and it has a threaded dial that can be used for micro adjustments to your position. 


Rear spring loaded Monopod with find adjust dial


Full length Picatinny rail for mounting your scope or other accessories. 
My rifle has the full length quad rail handguard for mounting accessories such as a bipod.  New models of the SRS have lighter weight handguards where you can add a Picatinny rail section versus having full length rails.  These newer handguards are lighter weight and I do recommend them.   The quad rail on my rifle adds a lot of unnecessary weight.


Hand guard with full Picatinny rails


The length of pull can be adjusted by adding or subtracting half-inch spacers.  This is a really nice feature as you can adjust the rifle to fit you.  If the rifle fits you, you are more comfortable.  When you are confortable you shoot better.  I wish all rifle stocks has this feature. 


Half-inch spacers can be added or removed to adjust length of pull

My rifle does not have an adjustable cheek piece, but the new models do.  I don’t think this feature is needed on the SRS.  Buy the correct height rings and you don’t need an adjustable cheek piece.   

The trigger is absolutely outstanding.  It really does not need adjustment from the factory.  You can have the trigger tuned if you are a trigger snob.  Make sure you find a gunsmith that really knows the Desert Tech. rifles.  Don’t let just anyone work on this rifles trigger. 

Now, for one of the best features of the SRS rifle.  It is designed to have a quick change barrel system.  Five screws and the barrel comes out.  You can swap out barrels and change calibers in less than 5 minutes in the field.  No gunsmithing required.  Go from .308 to .338 Lapua in 5 minutes or less. 
You have one rifle that shoots multiple calibers.  The big advantage to this system is you don’t need to adapt to a new stock, new scope, new trigger or new anything.  The stock, length of pull, trigger, eye relief to the scope, the grip are all the same everytime.  For long range shooting this consistency is useful. 

The barrels are all match grade stainless steel.  Again, Desert Tech. gives you a one-half MOA guarantee. 
Choose the caliber you want.  If you don’t see the caliber you want, call up Desert Tech. and they will machine you a barrel in the caliber you want. 

One note on changing barrels.  Going from .308 to 6.5 Creedmore is easy.  It is just a barrel change.  Going from .308 to .338 Lapua also requires you buy a new bolt and magazine as the .338 has a larger case head diameter. 


Now the downside:

Let me list some of the downsides of this rifle.

  1.         Cost.  Being a top tier rifle you are charged a top tier price.   The rifle, retail new, is about $4500.  So not for your casual target shooter.  The SRS is definitely aimed at customers who are serious about long range shooting or just want the best. 
  2.      Weight.  With the full length quad rail handguard, Scope and Scope mount, my rifle comes in at 15 pounds.  (Desert Tech. list 11.30 pounds stripped on their website)  A bit heavy to hump through the woods for a day.  On the other hand, that weight soaks up a lot of recoil making this a very pleasant rifle to shoot.
  3.      Pistol Grip.  The pistol grip is a bit large and fat.  And it is not changeable.  It is molded into the frame.   You are stuck with what it is.  So get used to it. 
  4.      Not a lot of aftermarket support.  Being a unitized chassis system, there is not a lot you can do with the rifle.  The good news, there isn’t much you need to do to it.
  5.       The rear Monopod is a bit wobbly for my tastes.  It doesn't move a lot.  Most people probably won't notice it.  But I do.  It irritates me.  Mostly a personal preference.    



Conclusion:

Overall I love this rifle.  It is a technological beast of a rifle that performs exceptionally well.  Yes, it is very expensive, but you get the performance you are paying for.  It comes standard with a lot of features that cost you extra on many other rifles.   Once you buy one, mount a scope and bipod and go shoot.  No need to worry about aftermarket do-dads.  You probably don’t need any.  Just go shoot. 

If you want a top tier rifle, definitely check out DesertTechnologies SRS line of rifles.  A lot of features and performance packed into a compact package.

One final comment.  If .338 Lapua isn’t big enough for you.  Desert Technologies has there HTI line of rifles in calibers such as .50 BMG, .416 Barret and .408/.375 CheyTac. 




By: Mez

12/2017