Showing posts with label shooting drills. Show all posts
Showing posts with label shooting drills. Show all posts

Tuesday, August 21, 2018

Range Night - DOT Torture Success!!

On the heels of GunDiva's recent post on shooting buddies, I scooted off to the range with my best friend for a little pew pew therapy and a stated goal to clean DOT Torture at three yards. The goal was to accomplish that with the Ruger 22/45 and Sig P320 Compact in 9mm. I'm pleased to say that the results were much improved from my last outing.

Ruger 22/45 at 3 yards

This was almost a perfect run. As you can see, I dropped 1 shot in the 3 dot when I anticipated the shot allowing the barrel to dip just enough. Other than that, I'm pretty pleased with that performance. It's also helpful to know what I did wrong that kept it from being perfect.

Sig P320 Compact 9mm at 3 yards
This could be a little tighter, but it's clean and that's what matters to me. YAY ME!!! Next goal is to clean the .22 at 3 yards and move both back to 5 yards.

The rest of the range session included a couple of mags through my buddies Springfield Armory 5" 9mm 1911. Allegedly, it's a TRP model, but there are some doubts on that subject. It could be a modified Loaded model given that he bought it used off a competition shooter. The trigger was typical 1911. This one was equipped with Bomar style adjustable sights.

SA 5" 1911 at 5 yards
 First shot was the 8 ring hit at roughly 11 o'clock using a center X hold. Adjusted the point of aim progressively to 5 o'clock in the 8 ring, and that's the rest of the shots.

SA 5" 1911 at 7 yards
Here again, point of aim was roughly five o'clock low. I can't complain with those results.

Sig P320 Compact at 3 yards

Ruger 22/45 at 5 yards

Ruger 22/45 at 5 yards

Ruger 22/45 at 5 yards

Ruger 22/45 at 5 yards - Target transitions left to right and back

Sig P320 Compact 9mm at 5 yards - Target transitions left to right and back

Frankly, I don't remember what I was doing or at what distance.

Sig P320 Compact 9mm at 5 yards - Target transitions left to right and back (getting better) 
Ruger 22/45 at 10 yards


Ruger 22/45 at 15 yards

Target transitions - Ruger 22/45 at 5 yards - point of aim 1" red pasters

Target transitions - Ruger 22/45 at 5 yards - point of aim red line between targets

Target transitions - Ruger 22/45 at 5 yards - point of aim 1" red pasters
Time and energy were turned into smoke and noise. A good time was had by all. I didn't embarrass myself, and it beats a day at the office any way you slice it.


Tuesday, July 10, 2018

Range Night and Other Odds and Ends

I just realized I never got around to posting part 3 of the Caliber series of posts. Oops. I'll get around to it eventually. Maybe. No one's been sending me hate mail asking where it is. So, maybe not.

I had an opportunity to get out to the range this evening with my best friend. It was my first chance to go pistol shooting since we attempted to simulate a small war in Hill County on Mother's Day. Much fun was had by all; but, sweet barbecue sauce, it was monkey melting HOT that day. We took turns shooting and sitting in the shade of carefully positioned canopies while drinking plenty of water, and it was still hot enough to marinate in your own juices. I didn't take many pictures that day because...it was just too dang hot to be bothered.

I did get to play with several toys that were brought by others including:

Ruger SR9 - my brother in law's Christmas gift from my sister. It's a polymer 9 made by Ruger. You could do a lot worse. Trigger is nothing to right home about, but I went bang every time.

Savage Mark II bolt action .22LR rifle with a suppressor - my cousin's friend Alex brought this little number out to play. It came nestled into a Boyd's At-One Adjustable Stock and propped up by a bipod. This thing was a frikkin' giggle factory. You've not heard quiet until you shoot subsonic .22LR ammo out of a suppressed bolt action rifle. Savage makes a really good trigger. However, their little stamped steel magazines, while functional, could be used to shave in a pinch.  I guess I'm just spoiled by Ruger 10/22 mags.

Sig P226 and P229 - Best friend brought both. I still don't shoot DA/SA triggers worth a flip, but I didn't embarrass myself quite as badly this time. Both of these guns are very nice with SRT triggers, upgraded suppressor height sights, etc. Maybe one day I will invest the time, energy and money into learning DA/SA triggers to make it worth it to add one to the collection. In the meantime...there's always 1911s to play with.

No name,  homegrown, AR-15 chambered in 9MM. My cousin's friend is a budding machinist in addition to being a gun nut. He made the lower receiver himself. Not hogged out an 80% lower on a jig made it. He took a block of aluminum, a mill, some measurements and went to town. This one uses stick mags, but he has another one he made which takes Glock mags. He's single and still lives at home with mom. So, he can get away with making his own toys.

AR-15 with a CMMG .22LR upper and a Franklin Binary trigger system - This is another giggle factory. It's as close to full auto as you are going to get this side of a tax stamp, and very controllable. I was able to put 25 rounds of standard velocity CCI onto a 3x5 note cards at 25 yards as fast as I could pull the trigger using a red dot optic. Like I said...giggle factory.

Tried out a 16 inch .300 Blackout AR upper on my Aero Precision lower. I might just have to get one as a short to medium range hunting option. Roughly the same power as a 7.62x39 or a .30-30. Not much more recoil that a 5.56/.223 AR.

There was my best friend's Sig P320 X-Carry with the Romeo1 red dot on it. He's had a lot of  stuff done to it including a flat faced trigger and a Norsso slide. I would need to spend a lot more time with it to give a fair opinion, but the trigger is really nice for a polymer striker fired gun. I need more time on a red dot equipped pistol to be anywhere near comfortable with them. It fed the rounds down range with reasonable accuracy. Further, affiant sayeth not.

There was a lot more stuff out there, but I didn't get to play with all of it.

Tonight was pistol night though.

We started off with DOT TORTURE. Again.

43 out of 50 at 5 yards with a Ruger Mk3 22/45
The hardest part of Dot Torture is learning to take your time. Once you learn how to control your gun and clean to drill, you can add a time element in...if you're a masochist. I probably should have run a magazine through the gun before starting the drill just to knock the rust off. But, sometimes you just have to see if you can perform the dancing bear routine cold.

Same distance - Sig P320 Carry 9mm
I'm not even sure how to score this target. If I'm being generous, that's a 42 out of 50. If I'm being honest, that's a sub 40 circus of mediocrity.

Learned something new tonight. Well, not really new per se. I already sort of knew it. I had just never thought about it in the context of a pistol before. When you shoot a bullet, it flies in a parabolic arc. That means that it leaves the barrel and "climbs" a little bit above the line of sight until evil, old gravity sucks it back to earth at which time it drops back below the line of sight and keeps going until it hits pay dirt. What this means for the pistol shooter is that your point of impact will "rise" as range increases for a constant point of aim to a certain point (the top of the parabolic arc). Rifle shooters already know this stuff and have serious, poo slinging arguments over what the best distance is to zero their weapons or maximum point blank range and other silliness that pistol shooters typically ignore.

My friend suggested I give this a whirl with the Sig P320 and the Ruger SR1911. The way you do this is put a 1" paster on the bottom of a piece of paper or 3x5 note card. Heck, any target will do. The key is to use the same point of aim. Fire one shot at 3 yards. Move the target back to 5 yards. Fire one more shot. Keep doing this at 7, 10, 15, 20 yards, etc. out to whatever range you can realistically center your sights on the same 1" paster point of aim reference. You should see your point of impact "ladder" vertically at each distance. With the P320, I shot a 3 round cloverleaf at 3, 5 and 7, but the 10 yard shot was definitely above the others. With the SR1911, the effect was more noticeable with each round stringing vertically with distinct separation between each shot. The shot at 3 yards was at least 2 to 3 inches lower (maybe 4) than the shot at 10 yards.

It's something everyone should do with any gun/ammo combination you intend to rely on for self defense. Not every self defense situation occurs at the same distance at which you practice, and you need to know where your gun will shoot for a given point of aim at a given distance. As a general rule of thumb, lower your point of aim as distance to target increases. Know yourself. Know your gear. Because you never know when you will have to hit the light switch on an intruder's CNS...in the dark...with your pulse doing twice the speed of light.

Last but not least, we did draws from concealment shooting two rounds on an A zone target at 5 yards. This was to put to bed a bit of smack talking that took place some months ago when my friend mentioned he'd picked up a shot timer and was working on his draws. He had started out in the 4 second range for 2 shots on target from concealment. I allowed as how he was a ham handed, gormless ape with no thumbs and two left feet. He questioned my parentage and allowed as how I could put up or shut up. I challenged him to same gear/same distance, and he suggested loser buys a box of ammo. So, I put on his Deadpool Kydex holster along with the previously mentioned 9mm Sig P320 Carry and gave it my best draw from concealment.

According to the timer, I threw down a 2.23 second time landing both hits in the A zone at 5 yards. Frankly, I'd never timed myself specifically on draw to double tap before...ever...much less using this gun and holster. So, the result was news to me. If I were to practice more with that gun and holster set up, I'm pretty sure I can bring that down in the sub 2 second range. Probably. Maybe. I'll just keep telling myself that.

Now, though, it was my best friend's turn. His time....drumroll please....2.40 seconds. Huge improvement over where he started in the 4 second range.

After all was said and done, we agreed that we were both in the same ballpark and the contest was a draw. It was all smoke and noise, and we had a great time.

Oh, one last thing, I ran 10 rounds through my friends Sig P365. This is Sig's new sub compact carry pistol which manages to stuff 10 rounds of 9mm in a package roughly the same size as a Glock 43 or a S&W Shield. The things shot amazingly well for a gun that size. I put all 10 in a head shot grouping of about 2 to 3 inches from 5 yards. I'll just say I wouldn't turn one down if it were given to me.

Tuesday, April 11, 2017

Changing it up

I've been focusing on the Dot Torture. I see it in my sleep sometimes, I swear!

I've now cleared it right-handed at 3 yards with three of my pistols: GSG 1911-22; Glock 42 (.380); and my Para-Ordnance 1911 (.45).




I even cleared it last week left-handed at 3 yards with my GSG 1911-22. Still need to shoot it clean with my G42 and Para.


I do love the Dot Torture and it has improved my shooting by leaps and bounds, but I feel like I was eating, sleeping, and breathing Dot Torture, so when a new drill showed up on my Facebook feed I decided to give it a try. I've seen it before, but had forgotten to write it down or save it. This time I remembered. It's the Tactical Professor's "Baseline Evaluation" that I stole from Active Response Training (that he re-blogged from Tactical Professor).

This was a fun, quick drill, five sequences of ten shots. Though untimed, it does require one to focus on the fundamentals. One of my failures is that if I start from a low-ready, I tend to overshoot my target on the first round (for example, my first round ends up as a head shot instead of a body shot). This is a great drill for remembering to slow down and find that front sight. There is also one mag change per sequence, and I found that I'm fairly accurate with my first round after a mag change (thanks to dots 9 and 10 on the Dot Torture).

The instructions say to mark your target after each sequence with a pen or with masking tape. I forgot about those instructions when I shot the first couple of tehm. When I got out to 7 yards and threw my first couple of rounds out of the 10-ring, I thought I could remember which rounds were which, but by the time I got to 10 yards, I had to start marking.

I'm waiting on my IDPA targets to arrive, so I used the silhouette targets that the range had. I scored my target in two ways for each distance: the first score was total rounds in the 10-ring; my second score was total rounds in the 8-ring. I'm sure that once I get the IDPA targets my scores will change somewhat (worse, I think, because I found the 8-ring really generous).

Even with the generous 8-ring, I threw the last two rounds of my last string at 15 yds.
My scores with the Para, shooting right-handed were:
  • 3 yd 10/10 in 10-ring
  • 5 yd 10/10 in 10-ring
  • 7 yd 6/10 in 10-ring;10/10 in 8-ring
  • 10 yd 8/10 in 10-ring; 10/10 in 8-ring
  • 15 yd 3/10 in 10-ring; 8/10 in 8-ring
  • Total 37/50 in 10-ring; 48/50 in 8-ring.
I switched to left-handed with my GSG and remembered to mark the targets after each sequence with masking tape. It makes for an ugly target, but one that is much easier to score.

One day, I'll stop pushing to the right with this gun.

My scores with the GSG, shooting left-handed were:
  • 3 yd 10/10 in 10-ring
  • 5 yd 10/10 in 10-ring
  • 7 yd 6/10 in 10-ring;10/10 in 8-ring
  • 10 yd 3/10 in 10-ring; 10/10 in 8-ring
  • 15 yd 0/10 in 10-ring; 8/10 in 8-ring
  • Total 29/50 in 10-ring; 50/50 in 8-ring.
I still had time and 20 rounds left, so I brought the target in to 3 yards and shot 10 rounds left-handed, and 10 rounds right-handed. My left-handed group was much tighter, but just to the right of center, than my right-handed rounds.

I did have an experience at the range for the first time that I'm not thrilled with - there was a new(er) shooter in the lane next to me who had a hot piece of brass go down her shirt. I get it, it's hot. However, you don't get to jump around in your lane waving your gun around. She got an ugly, pissed-off instructor look from me, and a terse "watch your muzzle!". She was quite apologetic and I hope she learned a lesson about muzzle discipline. I never want to discourage a new shooter, but I also don't want anyone getting hurt.

Please, if you are teaching someone to shoot, or even just taking someone shooting, tell them in advance what to do if they get brass down their shirt. If you shoot often enough, it's going to happen and it shouldn't have tragic consequences. If the new shooter knows what to do in advance, then they will have a plan in place.

Tuesday, January 31, 2017

Happy Dance!

One of my shooting goals for this year was to shoot 200 rounds per month and I was running out of time to meet my goal. Mez and I went to the range on Sunday, where I'd hoped to finish out my 200. I took my GSG 1911-22. I have a fair bit of .22LR right now, and can afford to shoot that up, so for the next bit that's what I'll be practicing with.

I've some *this close* to shooting the Dot Torture clean for well over a year. My last attempt was with the G42 and G43 last month. Close, but no cigar. For our Sunday Gunday, I planned on shooting the drill with both my right and left hands. I might have been a bit cocky, knowing that shooting a full-sized 1911 chambered in .22 should have been a breeze compared to shooting the drill with pocket pistols. The last time I shot the Dot Torture with the GSG was in October of 2012. It's been a while and I didn't realize until I reviewed the post just how badly I'd sucked that go 'round.

Sunday's trip to the range wasn't as great as I had hoped, but it was a damn sight better than the time I shot it in 2012!

Right handed 40/50

Left handed 39/50

I am a Weaver shooter. It's the way I was taught, and it's what I'm comfortable with. However, we teach isosceles in our pistol classes, so I thought I'd shoot the way I'd been teaching. Isosceles is not at all comfortable for me. It's not so much the fighting the muscle memory that's difficult, but the girls get squished and in the way; it's physically uncomfortable for me to shoot isosceles. However, discomfort or not, I was determined to shoot both drills (right- and left-handed) in this manner. I can't say I hate the stance if I don't give it a fair shake, right?

Sunday Gunday was still a pretty good day, despite the fact that I should have shot much better than I did. I got range time, got to hang with Mez, and slung 100 rounds down range. There are much worse days than that.

Even with Sunday's shooting trip, I was short of my goal by about 40 rounds. I didn't have to be into work until noon today, so I took my happy ass to the range for another round of Dot Torture with the GSG. This time was much better!

I reverted to my Weaver stance, the girls breathed a sigh of relief, and we got started. I threw my first round because I forgot that the sights are wonky. I stopped, put the gun down, gave myself a good reminder that I know that sights are off and re-started. Instead of getting a whole new target, I started over and continued with this one.

I was so thrilled with my first two groups I stopped the drill to take a picture. Usually when I start off strong, I get ahead of myself and that's when my shooting goes to crap. I wanted proof that I could shoot well before I went and blew it.

I was pretty happy with this start.
I warned myself not to get cocky and to take each shot one at a time. Take as much time as I needed and make the freaking shot.

Right handed 50/50

Left handed 46/50 (I scored it incorrectly initially)
The GSG is having some serious issues, but I worked through each and every one without getting frustrated and it showed. I had easily a 40% failure to fire rate. I took that opportunity to practice my trigger press without flinching and practice clearing the gun.

I had intended to leave the gun with the gunsmith, but since he wasn't in, I decided that I'm going to try to fix it myself. I think the issue is that the gun is dirty. I cleaned it really well the other day, but I know I haven't done a complete tear-down and cleaning (like to the frame tear-down) since I've owned it. If that doesn't fix the problem, then he'll have to go to the gunsmith.

By the end, my hands and arms were tired, but I was thrilled! I might have to do this shooting before work business more often!